Lists are always popular on blogs but lists can also be boring. This list is informative and important, just like our staff! Please leave comments and let us know if you agree.

1. 

   HDM-DAD

   What it does — verifies that all the EDID signals have the necessary integrity.
   Problems Solved — Provides analysis of the Low Speed Data Stream which includes the 5 volt feed from the source to the display, the Hot Plug Detect return voltage from the display to the course, the Data line and Clock feed. The LED display lights on the top of the case indicate the status of these EDID components. If there are issues with any of these feed the DAD will repair them.

2. 

   HDM-JRPLUS

   What it does — Less expensive EDID repair tool to leave at the job site to solve all the same issues of the HDM-DAD.
   Problems Solved — Audio drop outs, long sync times between sources, “HDCP not supported” issues on your display screen, “Mode not supported” on your display screen, “Mode out of range” on your display screen, black screen on your display and Picture and Sound drop out for a few seconds and then returns are all solved by this product. The HDM-VI2 is fully HDMI 2.0, 18 Gbps compatible meaning this product will fulfill your needs of today and into the future.

3. 

   HDM-EDIDB

   What it does — save's the integrators sanity and life, because the HDM-EDIDB will completely strip the EDID return information from any displays.
   Problems Solved — allows the integrator to set the desired resolution and refresh rate of the NVR/DVR. With the EDID blocked there will be no conflict between the NVR/DVR and the video distribution system.

4. 

   HDM-VI2

   What it does — repairs some common HDMI problems.
   Problems Solved — It fixes the 5 Volt and Hot Plug supply failures; resolves the common problem of the Display returning its Hot Plug Detect signal before the AVR (or Matrix) is prepared to hear it.
   The HDM-VI2 is fully HDMI 2.0, 18 Gbps compatible meaning this product will fulfill your needs of today and into the future.

5. 

   HDMI SP2

   What it does — help reduce the chance of your HDMI electronics being damaged by Electrostatic Discharge (ESD) spikes up to 8000 Volts.
   Problems Solved — act as the final defense against ESD damage to your devices. The HDM-VI2 is fully HDMI 2.0, 18 Gbps compatible meaning this product will fulfill your needs of today and into the future.

6. 

   CS-DAC

   What it does — Takes the 2 channel (PCM) data stream from the digital source and converts it to the analog RCA format for the distribution system.
   Problems Solved — Connecting sources without analog audio outputs to house audio systems.

This and other products can be found here.